KSB Gate Valve

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

By following industrial quality guidelines, we are indulged in providing a broad range of Ksb Y Type Alloy Steel Globe Valve. Our dedicated professionals, who hold huge industrial knowledge, manufacture the whole range of these valves by making use of unmatched quality raw materials and superior techniques. Before being delivered at clients end, these valves are examined properly on varied parameters to ensure their durability and high quality.

Globe Valves

Globe Valves to ANSI/ASME with Gland Packing

SICCA 900-2500 GLC

Main applications

 Boiler feed applications

 Fossil-fuelled power stations

 Petrochemical industry

 Pipelines and tank farms

 Refineries

 Process engineering

Fluids handled

 Steam

 Fluids containing gas

 Condensate

 Oil

 Feed water

 Vacuum

Operating data

Operating properties

Characteristic Value

Nominal pressure Class 900 - 2500

Nominal size [inch] NPS 2 - 8

Max. permissible pressure [bar] 431

Max. permissible pressure [psi] 6250

Min. permissible temperature [°C] ≥ 0

Max. permissible temperature [°C] ≤ +650

Min. permissible temperature [°F] ≥ 0

Max. permissible temperature [°F] ≤ +1200

Selection as per pressure/temperature ratings (??? Page 5)

Body materials

Overview of available materials

Material Temperature limit

[°C] [°F]

ASTM A216 WCB ≤ 425 ≤ 800

ASTM A216 WCC ≤ 425 ≤ 800

ASTM A217 WC6 ≤ 593 ≤ 1100

ASTM A217 WC9 ≤ 593 ≤ 1100

ASTM A217 C12A ≤ 650 ≤ 1200

Design details

Design

 Globe valve to ASME B16.34

 Cast steel body

 Straight-way Y-valve

 Seat/disc interface made of wear-resistant and corrosionproof

Stellite

 Pressure seal design

 Outside screw

 Outside yoke

 Non-rotating stem

 Rising stem

 Non-rising handwheel

 Graphite gaskets and graphite packing with braided

packing end rings offering wiping action

 Butt weld ends

 "Special Class" version

 The valves satisfy the safety requirements of Annex I of

the European Pressure Equipment Directive 2014/68/EU

(PED) for fluids in Groups 1 and 2.

Only for Standard Class version

 The valves meet the requirements of the Indian Boiler

Regulations 1950.

Variants

 Position indicator

 Locking device

 Bypass

 Stem protecting tube

 Actuator can be retrofitted directly after handwheel has

been removed.

 Electric actuators

 Gearboxes

 Limit switches

 Drain plug

 Drain branch

Product benefits

 Long service life and high functional reliability

– Two-piece self-aligning gland follower ensures even

compression of packing rings.

– Inconel-reinforced braided packing end rings offer

smooth wiping action and prevent extrusion of

graphite.

– Stellite 6 hard-faced body seat ensures high wear

resistance.

– Burnished stem and smooth stuffing box surfaces

extend the service life of the gland packing.

– Rotating, self-aligning valve disc ensures reliable

function.

– Low actuating torque due to rolling e

Ksb Y Type Alloy Steel Globe Valve
Ksb Y Type Alloy Steel Globe Valve
Ksb Y Type Alloy Steel Globe Valve
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE

Approx. Rs 800 / PieceGet Latest Price

Product BrochureProduct Details:

Globe ValvesGlobe Valves to ANSI/ASME with Gland PackingECOLINE GLF 150-600Main applications??? Boiler feed application Fossil-fuelled power stations Petrochemical industry Pipelines and tank farms Refineries Process engineeringFluids handled Steam Fluids containing gas Fluids containing mineral oils Gas High-temperature hot water Feed water OilOperating dataOperating propertiesCharacteristic ValueNominal pressure Class 150 - 600Nominal size [inch] NPS  - 2Max. permissible pressure [bar] 104Max. permissible pressure [psi] 1480Min. permissible temperature [°C] ≥ 0Min. permissible temperature [°F] 32Max. permissible temperature [°C] ≤ +816Max. permissible temperature [°F] +1500Temperatures < 0 °C on requestSelection as per pressure/temperature ratings (ð Page 6)Body materialsOverview of available materialsMaterial Temperature limitASTM A 105 ≤ 427 °C / 800 °FASTM A 182 F11 ≤ 593 °C / 1100 °FASTM A 182 F22 ≤ 593 °C / 1100 °FASTM A 182 F304 ≤ 816 °C / 1500 °FASTM A 182 F316 ≤ 816 °C / 1500 °FASTM A 182 F304L ≤ 427 °C / 800 °FASTM A 182 F316L ≤ 450 °C / 850 °FOther materials on request.Design detailsDesign Globe valve to API 602 Tested to API 598 Body made of forged steel??? Bolted bonnet Outside screw Outside yoke Rotating stem Rising handwheel Stem sealed by gland packing Reduced bore Two-piece self-aligning gland follower Graphite gland packing Stem with burnished shank Fully confined bonnet gasket Back seat??? Solid valve disc Integral seat - ST6 (HF) The valves satisfy the safety requirements of Annex I ofthe European Pressure Equipment Directive 2014/68/EU (PED) for fluids in Groups 1 and 2. The valves do not have a potential internal source ofignition and can be used in potentially explosiveatmospheres, Group II, category 2 (zones 1+21) andcategory 3 (zones 2+22) to ATEX 2014/34/EU.VariantsSeal-welded body/bonnet joint Full bore Hard-faced back seat Extended bonnet Locking device Position indicator Electric actuators Version in compliance with TA-Luft (German Clean Air Act)to VDI 2440 for temperatures up to 400 °C Butt weld ends NACE standard Other flanged end designs or butt weld ends to ASMEB16.25

Other trimsProduct benefitsLong gland life and high functional reliability Stem with shank burnished to a surface finish of 0.2 μmfor reduced friction, lower actuating torque and improvedsealing to atmosphere.Packing end rings enable higher compressive force bygland follower and prevent extrusion of middle graphitepacking rings. Two-piece self-aligning gland follower prevents distortionon stem surface caused by improper assembly.Reliable sealing and longer service life Hard-faced body seat and solid disc seat made of wearresistantand corrosion-proof materials for handling allkinds of corrosive and erosive fluids. Male/female joint between body and bonnet preventsexcessive compression of fully confined gasket, resulting inlonger gasket life and improved sealing performance.Additional safety and blow-out protection Standard metal back seat prevents blow-out of stem andother internal components from the valve body andbonnet as a result of fluid pressure inside the valve body.Versatile application Stem nut made of chrome nickel steel is suitable fornumerous applications, particularly fluids which must notcome into contact with component materials containingcopper.Extended maintenance-free service life Hard-facing applied to valve disc and seat rings by depositwelding provides extra wear allowance and ensuresreliable long-term shut-off even with frequent opening/closing cycles. Integral seating surface is highly resistant to wear andeasy to repair after long-term operation.Related document

KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE

Approx. Rs 2,000 / PieceGet Latest Price

Product Details:

Design▪ Gate valve to API 602 (Class 800 / 1500)▪ Gate valve to ASME B16.34 (Class 2500)▪ Tested to API 598▪ Body made of forged steel▪ Straight-way pattern▪ Bolted bonnet (Class 800)▪ Welded bonnet (Class 1500 / 2500)▪ Hard-faced seat/disc interface (13 % chrome steel/Stellite)▪ Fully confined bonnet gasket (Class 800)▪ Two-piece self-aligning gland follower▪ Graphite gland packing with braided graphite packingend rings▪ Solid wedge▪ Stem with burnished shank▪ Non-rotating stem▪ Rising stem▪ Non-rising handwheel▪ Outside screw▪ Outside yoke▪ Seat ring ST6(HF) swaged▪ The valves satisfy the safety requirements of Annex I ofthe European Pressure Equipment Directive 2014/68/EU(PED) for fluids in Groups 1 and 2.

Approx. Rs 1,200 / PieceGet Latest Price

Product Details:

KSB GATE VALVE
Product benefits▪ Long service life and high functional reliability– Two-piece self-aligning gland follower ensures evencompression of packing rings.– Inconel-reinforced braided packing end rings offersmooth wiping action and prevent extrusion ofgraphite.– Burnished stem and smooth stuffing box surfacesextend the service life of the gland packing.▪ Additional features ensure safe sealing to atmosphere:– Additional safety and blow-out protection bystandard back seat.– Fully confined bonnet gasket with controlledcompression ensures leak-proof joint.– Welded body/bonnet joint provides added safety athigh operating pressures and operatingtemperatures.– Die-formed endless graphite packing rings reliablyseal the stem passage.▪ Reliable, tight shut-off– Hard-faced body seat made of wear-resistant andcorrosion-resistant 13 % chrome steel or Stellite.– Perfect contact at seat/wedge interface ensures tightshut-off.Related documentsInformation/documentsDocument Reference numberOperating manual 0500.80Purchase order specificationsPlease specify the following information in all enquiries orpurchase orders:1. Type2. Class3. Nominal size4. Design pressure5. Design temperature6. Operating pressure7. Operating temperature8. Differential pressure9. Material10. Fluid handled11. Flow rate12. Pipe connection13. Pipe schedule14. Variants15. Reference number